{"title":"Fenders","description":null,"products":[{"product_id":"p-128079","title":"Front Fork Stabilizer SR400\/500 (2%er Original)","description":"\u003cp class=\"midashi\"\u003eDesigned to blend in on the street\u003cbr\u003eVintage stabilizer\u003c\/p\u003e\u003cbr\u003eThe stabilizers mounted on front forks in American dirt races and grassroots races from the late 1960s through the '70s\u003cbr\u003eare revived with a street-friendly design, made specifically for the SR400\/500.\u003cbr\u003e(Can also be installed on the XS650, TX650, etc., which have the same mounting pitch)\u003cbr\u003e \u003cbr\u003eNot only does it have a vintage look,\u003cbr\u003eit uses lightweight, strong 5mm-thick aluminum to increase front-end rigidity.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eAluminum\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eMain unit\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003eCan also be installed on the XS650, TX650, etc., which have the same mounting pitch\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_6.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_7.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_8.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_9.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_10.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_11.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_12.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P1251EX0_img_13.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003eAbout\u003cbr\u003e2%er (Two Percenter)\u003c\/p\u003e\u003cbr\u003eReleases many custom bikes and parts, mainly for the SR\u003cbr\u003eCheck out a product lineup that brings their unique chopper style to life\u003cbr\u003e\u003cbr\u003eWEB:\u003ca href=\"https:\/\/2-percenter.com\/\" target=\"_blank\"\u003ehttps:\/\/2-percenter.com\/\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2p_top.png\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446258401438,"sku":"2P1251EX0","price":14300.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000028079000.jpg?v=1790757884"},{"product_id":"p-128073","title":"Cheek Bar (Front Stabilizer) SR400\/500 (2%er Original)","description":"\u003cp class=\"midashi\"\u003eCheek bar for SR\u003cbr\u003eThe classic B-grade chopper style\u003c\/p\u003e\u003cbr\u003eCheek bar for SR (front stabilizer)\u003cbr\u003eWhen running long forks, installing a cheek bar prevents front fork\u003cbr\u003eyawing (flex).\u003cbr\u003eA must-have for the classic B-grade chopper style.\u003cbr\u003eSplit type for easy installation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eDuralumin\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eMain unit\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_6.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_7.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_8.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2P002EX0_img_9.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003eAbout\u003cbr\u003e2%er (Two Percenter)\u003c\/p\u003e\u003cbr\u003eReleases many custom bikes and parts, mainly for the SR\u003cbr\u003eCheck out a product lineup that brings their unique chopper style to life\u003cbr\u003e\u003cbr\u003eWEB:\u003ca href=\"https:\/\/2-percenter.com\/\" target=\"_blank\"\u003ehttps:\/\/2-percenter.com\/\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/2p_top.png\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446259843230,"sku":"2P002EX0","price":19250.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000028073000.jpg?v=1790758028"},{"product_id":"p-100142","title":"Side Wave Fender Rear for SR400\/500","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eFlat-type fender with wave-design sides\u003c\/p\u003e\u003cbr\u003eFlat-type front fender for SR400\/500 with wave-design sides. Simple and easy to use. Wide enough for 120mm-wide tires.\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00001_img_1.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00001_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eWidth: approx. 150mm  Outer circumference: approx. 775mm　\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout FRP \/ black gelcoat\u003c\/p\u003e\u003cbr\u003e• FRP is black from the start, but this is not a painted black and is not a \"clean black.\" It can be used as is, but it will discolor and fade over time, so we recommend painting it. \u003cbr\u003e• FRP products have unavoidable scuff marks from the molding process, such as when removed from the mold. Slight fading is also considered \"within the acceptable range for FRP products.\" Please think of it strictly as a base for paint. \u003cbr\u003e• FRP products may crack if excessive force is applied.\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446571335838,"sku":"G6-00001","price":15400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000000142000.jpg?v=1790761166"},{"product_id":"p-102832","title":"Round Bob Fender Kit Red for SR400\/500","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eRound bobbed fender with LED oval taillight\u003c\/p\u003e\u003cbr\u003eBolt-on round bobbed fender kit for SR400\/500. Includes LED oval taillight\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003eBOLT ON.\u003cbr\u003eInstalls on the stock frame as-is\u003c\/p\u003e\u003cbr\u003eAchieve a clean rear end while keeping the stock frame.\u003cbr\u003eEasy bolt-on installation\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00023-02_img_1_d0c7c846-58ce-4701-8de2-3b28a3588f4b.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003eStylish.\u003cbr\u003eBeautiful flowing form\u003c\/p\u003e\u003cbr\u003eA round bobbed fender with a beautiful flowing form.\u003cbr\u003eSetting the taillight further in gives an even cleaner look\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00023-02_img_2_fa013a41-ed3e-4b96-831e-d792bb1df640.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00023-02_img_3_f99e66db-fff3-4600-9a1d-c82c7fd1a13d.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eWidth: approx. 155mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1  Bracket x1 set  Taillight x1\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eCannot be used with the stock seat\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout FRP \/ black gelcoat\u003c\/p\u003e• FRP is black from the start, but this is not a painted black and is not a \"clean black.\" It can be used as is, but it will discolor and fade over time, so we recommend painting it. \u003cbr\u003e• FRP products have unavoidable scuff marks from the molding process, such as when removed from the mold. Slight fading is also considered \"within the acceptable range for FRP products.\" Please think of it strictly as a base for paint. \u003cbr\u003e• FRP products may crack if excessive force is applied.\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e• Combined with the tandem chopper seat\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00023-02_img_4_b5bfbf77-dbee-4c37-96a5-d91039e1c682.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00023-02_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e• Combined with the King Seat\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00023-02_img_6.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00023-02_img_7.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eDoes it fit the 4th-gen model?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eIt can be installed, but the \"King Seat\" shown in the installation images cannot be installed on FI models.\u003cbr\u003e\u003cbr\u003e*For the 4th-gen model, it can be installed as a King Seat + fenderless kit set.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.goods-co.net\/products\/detail.php?product_id=124729\" class='over\"' target=\"_blank\"\u003eKing Seat \u0026amp; L525 Fenderless Kit SR400\/FI ('10-'17) BK\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.goods-co.net\/products\/detail.php?product_id=124730\" class='over\"' target=\"_blank\"\u003eKing Seat \u0026amp; L525 Fenderless Kit SR400\/FI ('10-'17) BK\/WH\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.goods-co.net\/products\/detail.php?product_id=124731\" class='over\"' target=\"_blank\"\u003eKing Seat \u0026amp; 38ET Fenderless Kit SR400\/FI ('10-'17) BK\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.goods-co.net\/products\/detail.php?product_id=124732\" class='over\"' target=\"_blank\"\u003eKing Seat \u0026amp; 38ET Fenderless Kit SR400\/FI ('10-'17) BK\/WH\u003cbr\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446665937054,"sku":"G6-00023-02","price":27500.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000002832000.jpg?v=1790761631"},{"product_id":"p-104628","title":"Short Bobber Fender SR400\/500 (All Years)","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eThe stepped sides are the highlight\u003cbr\u003eBobber-style short fender\u003c\/p\u003e\u003cbr\u003eBobber-style short fender featuring stepped sides. Installed together with the stock inner fender.\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00103_img_1.jpg\" width=\"600\"\u003e \u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00103_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eWidth: approx. 153mm  Length: approx. 513mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1, mounting bolts x1 set, collar x4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00103_img_3.jpg\" width=\"600\"\u003e \u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00103_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout FRP \/ black gelcoat\u003c\/p\u003e\u003cbr\u003e• FRP is black from the start, but this is not a painted black and is not a \"clean black.\" It can be used as is, but it will discolor and fade over time, so we recommend painting it. \u003cbr\u003e• FRP products have unavoidable scuff marks from the molding process, such as when removed from the mold. Slight fading is also considered \"within the acceptable range for FRP products.\" Please think of it strictly as a base for paint. \u003cbr\u003e• FRP products may crack if excessive force is applied.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eCan the stock seat be installed?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eYes, it can be installed.\u003cbr\u003ePlease see the simple installation images\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00103_genuine_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00103_genuine_2.jpg\" width=\"600\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446703161502,"sku":"G6-00103","price":19250.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000004628000.jpg?v=1790761824"},{"product_id":"p-122819","title":"Round Up-Fender Kit SR400\/500","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eRecommended for VMX style\u003cbr\u003eThe up-fender kit that's in right now\u003c\/p\u003e\u003cbr\u003eFRP up-fender kit with black gelcoat finish for SR400\/500, recommended for VMX style.\u003cbr\u003eFits 21-inch wheels, with rubber-damped mounting.\u003cbr\u003eMounts under the lower stem; with a Bates light bracket, it mounts together with it.\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_imgR201_1.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_imgR201_4.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_imgR201_3.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_imgR201_2.jpg\"\u003e\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eClick to enlarge\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e*Not compatible with the stock light bracket.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eWidth: approx. 120mm  Outer circumference: approx. 800mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFender: FRP  Bracket: steel\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_1.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_2.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_3.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_4.jpg\"\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446740680862,"sku":"G6-00166","price":19580.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000022819000.jpg?v=1790762025"},{"product_id":"p-122820","title":"Up-Fender Bracket SR400\/500","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eRecommended for VMX style\u003cbr\u003eBracket that can also be used with universal fenders\u003c\/p\u003e\u003cbr\u003eBracket for repairing the SR round up-fender kit (G6-00166), also usable with aluminum or steel universal fenders.\u003cbr\u003eUse the included rubber dampers on the fender side.\u003cbr\u003e\u003cbr\u003e*The fender in the image is not included. Bracket only\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_1.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_2.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_3.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00166_img_4.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e*Not compatible with the stock light bracket.\u003cbr\u003e*The fender in the image is not included. Bracket only\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eWidth: 89mm  Length: 107mm  Height: 38mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eSteel\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446741106846,"sku":"G6-00167","price":6380.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000022820000.jpg?v=1790762029"},{"product_id":"p-122956","title":"Pipework Stabilizer SR400\/500","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eIncreases front rigidity\u003cbr\u003eCustom building that doesn't compromise on riding\u003c\/p\u003e\u003cbr\u003eA stabilizer ideal for increasing front-end rigidity when running fenderless. Add the dedicated fender to upgrade it to the pipe-work front fender.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eCompatible with FIRESTONE and more\u003c\/p\u003eCan be installed even with tall-profile tires like FIRESTONE. For riders who don't want a fender but don't want to lose front rigidity.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eA design that doesn't get in the way of your style\u003c\/p\u003eDesigned to be as simple as possible and blend into the bike, so it looks natural even on chopper and bobber styles. As the installation images for each model show, it suits any style perfectly.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eIncrease front rigidity with a stabilizer\u003c\/p\u003eThis one part restores the front rigidity lost by going fenderless, for a \"full custom you can actually ride.\"\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00042_img_1.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00042_img_2.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e*The '77- TX650 and XS650SP have φ35 forks, the same as the early SR, so it can be installed.\u003cbr\u003e*The '73-'76 TX650 and earlier XS1, XS650 (E), etc. have different forks, and installation has not been confirmed.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eTube diameter: φ15.9mm  Overall height: approx. 160mm  Overall width between forks: approx. 130mm  Front-rear bolt pitch: approx. 60mm  Bolt hole diameter: approx. 9mm\u003cbr\u003e\u0026lt;Compatible tire outer diameter\u0026gt;\u003cbr\u003eStabilizer only: 710mm  With fender: 690mm\u003cbr\u003eInner width: 121mm\u003cbr\u003eIf the tire is wider than 108mm, the stabilizer bolts must be fitted after the tire is installed.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eSteel\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eMain unit x1\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e*The front wheel must be removed for installation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00042_img_3.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00042_img_4.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00042_img_5.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00042_img_6.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eCan it be installed with a 21-inch wheel?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eYes, it can also be installed with a 21-inch wheel\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003eTo our dealers\u003c\/p\u003e\u003cbr\u003ePut it up in your guest room as a talking point with customers.\u003cbr\u003eWe offer original posters, ideal for promoting GOODS original parts and for shop interiors\u003cbr\u003e\u003cbr\u003eSee the posters here\u003cbr\u003e\u003ca href=\"https:\/\/www.goods-co.net\/products\/detail.php?product_id=122935\"\u003ehttps:\/\/www.goods-co.net\/products\/detail.php?product_id=122935\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003eThese posters are limited to 3 per purchase.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThey are promotional items strictly for in-store use.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eIf you need more, for example for multiple stores, please contact us.\u003cbr\u003e\u003cbr\u003e*Click to enlarge\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/GA-00076_img.jpg\"\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446747431070,"sku":"G6-00042-","price":10450.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000022956000.jpg?v=1790762060"},{"product_id":"p-122957","title":"Pipework Front Fender KIT SR400\/500","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eDoesn't spoil your style\u003cbr\u003eGOODS original front fender\u003c\/p\u003e\u003cbr\u003eBolt-on front fender. Mounting position adjusts up and down, so it can be installed even with tall-profile tires like Firestone. The bracket doubles as a stabilizer, also improving front rigidity.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eCompatible with FIRESTONE and more\u003c\/p\u003eUntil now, fitting a fender with tall-profile tires was difficult, but our pipe-work fender installs without any problem. If you'd given up on a front fender, this is your solution.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eA design that doesn't get in the way of your style\u003c\/p\u003eDesigned to be as simple as possible and blend into the bike, so it looks natural even on chopper and bobber styles. As the installation images for each model show, it suits any style perfectly.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eDoubles as a stabilizer to increase front rigidity\u003c\/p\u003eThis one part restores the front rigidity lost by going fenderless, for a \"full custom you can actually ride.\"\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_1.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_2.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_3.jpg\"\u003e \u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_4.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e*The '77- TX650 and XS650SP have φ35 forks, the same as the early SR, so it can be installed.\u003cbr\u003e*The '73-'76 TX650 and earlier XS1, XS650 (E), etc. have different forks, and installation has not been confirmed.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eFender\u003cbr\u003eLength: approx. 410mm  Width: approx. 104mm  Tube diameter: φ15.9mm\u003cbr\u003eStabilizer\u003cbr\u003eOverall height: approx. 160mm  Overall width between forks: approx. 130mm  Front-rear bolt pitch: approx. 60mm  Bolt hole diameter: approx. 9mm  Inner width: 121mm\u003cbr\u003e\u003cbr\u003e\u0026lt;Compatible tire outer diameter\u0026gt;\u003cbr\u003eStabilizer only: 710mm  With fender: 690mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFender: FRP  Bracket: steel\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1  Bracket x1 set  Pipe-work stabilizer x1\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e*If the tire is wider than 108mm, the stabilizer bolts must be fitted after the tire is installed.\u003cbr\u003e*The front wheel must be removed for installation.\u003cbr\u003e*Confirmed compatible with 4.00-size FIRESTONE tires.\u003cbr\u003e*It may not fit if the tire type or size is too large.\u003cbr\u003e\u003cbr\u003e*On the 3rd-gen SR and later, it mounts in a slightly higher position due to the height of the caliper mount. With stock-size tires there will be a slight gap as shown in the image\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_caution_1.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_caution_2.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout FRP \/ black gelcoat\u003c\/p\u003e• FRP is black from the start, but this is not a painted black and is not a \"clean black.\" It can be used as is, but it will discolor and fade over time, so we recommend painting it. \u003cbr\u003e• FRP products have unavoidable scuff marks from the molding process, such as when removed from the mold. Slight fading is also considered \"within the acceptable range for FRP products.\" Please think of it strictly as a base for paint. \u003cbr\u003e• FRP products may crack if excessive force is applied.\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eCan it be installed with a 21-inch wheel?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eYes, it can also be installed with a 21-inch wheel\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003eTo our dealers\u003c\/p\u003e\u003cbr\u003ePut it up in your guest room as a talking point with customers.\u003cbr\u003eWe offer original posters, ideal for promoting GOODS original parts and for shop interiors\u003cbr\u003e\u003cbr\u003eSee the posters here\u003cbr\u003e\u003ca href=\"https:\/\/www.goods-co.net\/products\/detail.php?product_id=122935\"\u003ehttps:\/\/www.goods-co.net\/products\/detail.php?product_id=122935\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003eThese posters are limited to 3 per purchase.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThey are promotional items strictly for in-store use.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eIf you need more, for example for multiple stores, please contact us.\u003cbr\u003e\u003cbr\u003e*Click to enlarge\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/GA-00076_img.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446748381342,"sku":"G6-00029-","price":17600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000022957000.jpg?v=1790762064"},{"product_id":"p-124280","title":"Fenderless Kit Battery-In without Taillight SR400\/500 ('78-Final) Black Painted Finish","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eSR short fender kit that lets you relocate and store the battery\u003c\/p\u003e\u003cbr\u003eSR short fender kit that lets you relocate and store the battery, which gets in the way of installing aftermarket seats ('09-'17 4th-gen models).\u003cbr\u003eOn models other than the 4th-gen, it can also be used as a small storage compartment.\u003cbr\u003e\u003cbr\u003eTaillights available as kits: Lucas L525 and Miller 38ET.\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003e3D Scanner.\u003cbr\u003eA fender eliminator kit that \"definitely suits the SR\"\u003c\/p\u003e\u003cbr\u003eUsing a 3D scanner, we created a fender eliminator kit that \"definitely suits the SR\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_32.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GENUINE SEAT.\u003cbr\u003eThe stock seat can also be installed\u003c\/p\u003e\u003cbr\u003eThe stock seat, which couldn't be used with the old fenderless kit, can now be installed.\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GOODS SEAT.\u003cbr\u003eAlso works great with non-stock seats\u003c\/p\u003e\u003cbr\u003eFits every seat in our lineup\u003cbr\u003e\u003cbr\u003eGOODSEAT \"SLENDER\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eMounting width: approx. 180mm\u003cbr\u003eFender inner width: approx. 155mm\u003cbr\u003eFront-rear length: approx. 430mm\u003cbr\u003eBattery mounting area (front-rear x left-right x depth): 91mm x 120mm x 20mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1\u003cbr\u003eMounting bolts x1 set\u003cbr\u003eAdjustment washers x8\u003cbr\u003eBattery strap\u003cbr\u003eSponge x2\u003cbr\u003eExtension harness x1\u003cbr\u003eHeat-shrink tube x2\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500 ('78-Final)\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eWith the \"battery-in\" type, if the bike is lowered or has tires taller than stock, it may interfere at full suspension compression.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout the license plate angle\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe license plate angle is 55 degrees from below\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe new license plate standard applies to vehicles newly registered on or after October 1, 2021.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eFor earlier vehicles, there is currently no specific angle requirement beyond being \"easy to read.\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eCan the battery be relocated on the Final (5th-gen)?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eYes, the battery can be relocated.\u003cbr\u003e(Some changes to the wire routing may be needed)\u003cbr\u003e\u003cbr\u003eHowever, please note that relocating the battery does not make it possible to install \"aftermarket seats for the 4th-gen,\" etc.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eOther parts will probably interfere.\u003cbr\u003e\u003cbr\u003eThere is little point in relocating the battery on the 5th-gen (and it could be misleading), so we list \"battery relocation\" for the 4th-gen only.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eWhat is the length from the rear fender mounting bolt to the stop lamp mounting surface?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eIt is about 111mm.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eIs it shaken compliant?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eThe standard for license plate mounting angles changed on October 1, 2021,\u003cbr\u003eand bikes newly registered after September 30, 2021 must have a mounting angle of 15-40 degrees,\u003cbr\u003eso our fenderless kits are not shaken compliant.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446793109662,"sku":"G6-00244","price":24200.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024280000.jpg?v=1790762358"},{"product_id":"p-124281","title":"Fenderless Kit Battery-In Lucas L525 SR400\/500 ('78-Final) Black Painted Finish","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eSR short fender kit that lets you relocate and store the battery\u003c\/p\u003e\u003cbr\u003eSR short fender kit that lets you relocate and store the battery, which gets in the way of installing aftermarket seats ('09-'17 4th-gen models).\u003cbr\u003eOn models other than the 4th-gen, it can also be used as a small storage compartment.\u003cbr\u003e\u003cbr\u003eTaillights available as kits: Lucas L525 and Miller 38ET.\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003e3D Scanner.\u003cbr\u003eA fender eliminator kit that \"definitely suits the SR\"\u003c\/p\u003e\u003cbr\u003eUsing a 3D scanner, we created a fender eliminator kit that \"definitely suits the SR\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_32.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GENUINE SEAT.\u003cbr\u003eThe stock seat can also be installed\u003c\/p\u003e\u003cbr\u003eThe stock seat, which couldn't be used with the old fenderless kit, can now be installed.\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GOODS SEAT.\u003cbr\u003eAlso works great with non-stock seats\u003c\/p\u003e\u003cbr\u003eFits every seat in our lineup\u003cbr\u003e\u003cbr\u003eGOODSEAT \"SLENDER\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eMounting width: approx. 180mm\u003cbr\u003eFender inner width: approx. 155mm\u003cbr\u003eFront-rear length: approx. 430mm\u003cbr\u003eBattery mounting area (front-rear x left-right x depth): 91mm x 120mm x 20mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1\u003cbr\u003eMounting bolts x1 set\u003cbr\u003eAdjustment washers x8\u003cbr\u003eBattery strap\u003cbr\u003eSponge x2\u003cbr\u003eExtension harness x1\u003cbr\u003eHeat-shrink tube x2\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500 ('78-Final)\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eWith the \"battery-in\" type, if the bike is lowered or has tires taller than stock, it may interfere at full suspension compression.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout the license plate angle\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe license plate angle is 55 degrees from below\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe new license plate standard applies to vehicles newly registered on or after October 1, 2021.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eFor earlier vehicles, there is currently no specific angle requirement beyond being \"easy to read.\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eCan the battery be relocated on the Final (5th-gen)?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eYes, the battery can be relocated.\u003cbr\u003e(Some changes to the wire routing may be needed)\u003cbr\u003e\u003cbr\u003eHowever, please note that relocating the battery does not make it possible to install \"aftermarket seats for the 4th-gen,\" etc.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eOther parts will probably interfere.\u003cbr\u003e\u003cbr\u003eThere is little point in relocating the battery on the 5th-gen (and it could be misleading), so we list \"battery relocation\" for the 4th-gen only.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eWhat is the length from the rear fender mounting bolt to the stop lamp mounting surface?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eIt is about 111mm.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eIs it shaken compliant?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eThe standard for license plate mounting angles changed on October 1, 2021,\u003cbr\u003eand bikes newly registered after September 30, 2021 must have a mounting angle of 15-40 degrees,\u003cbr\u003eso our fenderless kits are not shaken compliant.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446793339038,"sku":"G6-00245","price":26180.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024281000.jpg?v=1790762364"},{"product_id":"p-124282","title":"Fenderless Kit Battery-In Miller 38ET SR400\/500 ('78-Final) Black Painted Finish","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eSR short fender kit that lets you relocate and store the battery\u003c\/p\u003e\u003cbr\u003eSR short fender kit that lets you relocate and store the battery, which gets in the way of installing aftermarket seats ('09-'17 4th-gen models).\u003cbr\u003eOn models other than the 4th-gen, it can also be used as a small storage compartment.\u003cbr\u003e\u003cbr\u003eTaillights available as kits: Lucas L525 and Miller 38ET.\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003e3D Scanner.\u003cbr\u003eA fender eliminator kit that \"definitely suits the SR\"\u003c\/p\u003e\u003cbr\u003eUsing a 3D scanner, we created a fender eliminator kit that \"definitely suits the SR\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_32.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GENUINE SEAT.\u003cbr\u003eThe stock seat can also be installed\u003c\/p\u003e\u003cbr\u003eThe stock seat, which couldn't be used with the old fenderless kit, can now be installed.\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GOODS SEAT.\u003cbr\u003eAlso works great with non-stock seats\u003c\/p\u003e\u003cbr\u003eFits every seat in our lineup\u003cbr\u003e\u003cbr\u003eGOODSEAT \"SLENDER\"\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eMounting width: approx. 180mm\u003cbr\u003eFender inner width: approx. 155mm\u003cbr\u003eFront-rear length: approx. 430mm\u003cbr\u003eBattery mounting area (front-rear x left-right x depth): 91mm x 120mm x 20mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1\u003cbr\u003eMounting bolts x1 set\u003cbr\u003eAdjustment washers x8\u003cbr\u003eBattery strap\u003cbr\u003eSponge x2\u003cbr\u003eExtension harness x1\u003cbr\u003eHeat-shrink tube x2\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500 ('78-Final)\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eWith the \"battery-in\" type, if the bike is lowered or has tires taller than stock, it may interfere at full suspension compression.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout the license plate angle\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe license plate angle is 55 degrees from below\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe new license plate standard applies to vehicles newly registered on or after October 1, 2021.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eFor earlier vehicles, there is currently no specific angle requirement beyond being \"easy to read.\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eCan the battery be relocated on the Final (5th-gen)?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eYes, the battery can be relocated.\u003cbr\u003e(Some changes to the wire routing may be needed)\u003cbr\u003e\u003cbr\u003eHowever, please note that relocating the battery does not make it possible to install \"aftermarket seats for the 4th-gen,\" etc.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eOther parts will probably interfere.\u003cbr\u003e\u003cbr\u003eThere is little point in relocating the battery on the 5th-gen (and it could be misleading), so we list \"battery relocation\" for the 4th-gen only.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eWhat is the length from the rear fender mounting bolt to the stop lamp mounting surface?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eIt is about 111mm.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eIs it shaken compliant?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eThe standard for license plate mounting angles changed on October 1, 2021,\u003cbr\u003eand bikes newly registered after September 30, 2021 must have a mounting angle of 15-40 degrees,\u003cbr\u003eso our fenderless kits are not shaken compliant.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446793666718,"sku":"G6-00246","price":26180.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024282000.jpg?v=1790762369"},{"product_id":"p-124283","title":"Fenderless Kit without Taillight SR400\/500 ('78-Final) Black Painted Finish","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eSimple FRP short fender kit.\u003c\/p\u003e\u003cbr\u003eSimple FRP short fender kit.\u003cbr\u003eWith no battery storage space, it can be installed with confidence even on lowered bikes or with tall-profile tires.\u003cbr\u003e\u003cbr\u003eTaillights available as kits: Lucas L525 and Miller 38ET.\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003e3D Scanner.\u003cbr\u003eA fender eliminator kit that \"definitely suits the SR\"\u003c\/p\u003e\u003cbr\u003eUsing a 3D scanner, we created a fender eliminator kit that \"definitely suits the SR\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_32.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GENUINE SEAT.\u003cbr\u003eThe stock seat can also be installed\u003c\/p\u003e\u003cbr\u003eThe stock seat, which couldn't be used with the old fenderless kit, can now be installed.\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e*The production fender is black\u003cbr\u003e*The taillight in the image is the L525\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GOODS SEAT.\u003cbr\u003eAlso works great with non-stock seats\u003c\/p\u003e\u003cbr\u003eFits every seat in our lineup\u003cbr\u003e\u003cbr\u003eGOODSEAT \"SLENDER\"\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eMounting width: approx. 180mm\u003cbr\u003eFender inner width: approx. 155mm\u003cbr\u003eFront-rear length: approx. 430mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1\u003cbr\u003eMounting bolts x1 set\u003cbr\u003eAdjustment washers x8\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500 ('78-Final)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout the license plate angle\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe license plate angle is 55 degrees from below\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe new license plate standard applies to vehicles newly registered on or after October 1, 2021.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eFor earlier vehicles, there is currently no specific angle requirement beyond being \"easy to read.\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446793994398,"sku":"G6-00247","price":23650.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024283000.jpg?v=1790762375"},{"product_id":"p-124284","title":"Fenderless Kit Lucas L525 SR400\/500 ('78-Final) Black Painted Finish","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eSimple FRP short fender kit.\u003c\/p\u003e\u003cbr\u003eSimple FRP short fender kit.\u003cbr\u003eWith no battery storage space, it can be installed with confidence even on lowered bikes or with tall-profile tires.\u003cbr\u003e\u003cbr\u003eTaillights available as kits: Lucas L525 and Miller 38ET.\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003e3D Scanner.\u003cbr\u003eA fender eliminator kit that \"definitely suits the SR\"\u003c\/p\u003e\u003cbr\u003eUsing a 3D scanner, we created a fender eliminator kit that \"definitely suits the SR\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_32.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GENUINE SEAT.\u003cbr\u003eThe stock seat can also be installed\u003c\/p\u003e\u003cbr\u003eThe stock seat, which couldn't be used with the old fenderless kit, can now be installed.\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e*The production fender is black\u003cbr\u003e*The taillight in the image is the L525\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GOODS SEAT.\u003cbr\u003eAlso works great with non-stock seats\u003c\/p\u003e\u003cbr\u003eFits every seat in our lineup\u003cbr\u003e\u003cbr\u003eGOODSEAT \"SLENDER\"\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00248_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eMounting width: approx. 180mm\u003cbr\u003eFender inner width: approx. 155mm\u003cbr\u003eFront-rear length: approx. 430mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1\u003cbr\u003eMounting bolts x1 set\u003cbr\u003eAdjustment washers x8\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500 ('78-Final)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout the license plate angle\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe license plate angle is 55 degrees from below\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe new license plate standard applies to vehicles newly registered on or after October 1, 2021.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eFor earlier vehicles, there is currently no specific angle requirement beyond being \"easy to read.\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446794256542,"sku":"G6-00248","price":25630.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024284000.jpg?v=1790762381"},{"product_id":"p-124285","title":"Fenderless Kit Miller 38ET SR400\/500 ('78-Final) Black Painted Finish","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eSimple FRP short fender kit.\u003c\/p\u003e\u003cbr\u003eSimple FRP short fender kit.\u003cbr\u003eWith no battery storage space, it can be installed with confidence even on lowered bikes or with tall-profile tires.\u003cbr\u003e\u003cbr\u003eTaillights available as kits: Lucas L525 and Miller 38ET.\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003e3D Scanner.\u003cbr\u003eA fender eliminator kit that \"definitely suits the SR\"\u003c\/p\u003e\u003cbr\u003eUsing a 3D scanner, we created a fender eliminator kit that \"definitely suits the SR\"\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_32.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00222_making_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GENUINE SEAT.\u003cbr\u003eThe stock seat can also be installed\u003c\/p\u003e\u003cbr\u003eThe stock seat, which couldn't be used with the old fenderless kit, can now be installed.\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e*The production fender is black\u003cbr\u003e*The taillight in the image is the L525\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003ewith GOODS SEAT.\u003cbr\u003eAlso works great with non-stock seats\u003c\/p\u003e\u003cbr\u003eFits every seat in our lineup\u003cbr\u003e\u003cbr\u003eGOODSEAT \"SLENDER\"\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00249_img_5.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eMounting width: approx. 180mm\u003cbr\u003eFender inner width: approx. 155mm\u003cbr\u003eFront-rear length: approx. 430mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFRP\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1\u003cbr\u003eMounting bolts x1 set\u003cbr\u003eAdjustment washers x8\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500 ('78-Final)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003eAbout the license plate angle\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe license plate angle is 55 degrees from below\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThe new license plate standard applies to vehicles newly registered on or after October 1, 2021.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eFor earlier vehicles, there is currently no specific angle requirement beyond being \"easy to read.\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446794485918,"sku":"G6-00249","price":25630.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024285000.jpg?v=1790762387"},{"product_id":"p-124456","title":"Fender Up Bracket SR400\/500 ('78-Final)","description":"\u003cp class=\"midashi\"\u003eWhen fitting tall-profile tires\u003c\/p\u003e\u003cbr\u003eBracket that raises the fender.\u003cbr\u003eWith a tight rib fender (varies by fender), the adjustment range is 15-31mm.\u003cbr\u003eDesigned for 3mm-thick fenders, so the included spacers may need to be changed depending on thickness.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00242_img_1.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00242_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eOuter dimensions: 84mm x 55mm　\u003cbr\u003eThickness: 3.2mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eSteel\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eBracket x1, mounting bolts x1 set\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500 ('78-Final)\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eDesigned for 3mm-thick fenders, so the included spacers may need to be changed depending on thickness\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eDuring installation\u003c\/p\u003e\u003cbr\u003eThere will be a gap where it mounts to the fork, so sandwich the included washers when tightening\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00242_img_3.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446796026014,"sku":"G6-00242","price":3300.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024456000.jpg?v=1790762425"},{"product_id":"p-124718","title":"Pipework Front Fender Black Painted Finish SR400\/500","description":"\u003cbr\u003e\u003cp class=\"midashi\"\u003eDoesn't spoil your style\u003cbr\u003eGOODS original front fender\u003c\/p\u003e\u003cbr\u003eBolt-on front fender. Mounting position adjusts up and down, so it can be installed even with tall-profile tires like Firestone. The bracket doubles as a stabilizer, also improving front rigidity.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_1.jpg\"\u003e \u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_2.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eCompatible with FIRESTONE and more\u003c\/p\u003eUntil now, fitting a fender with tall-profile tires was difficult, but our pipe-work fender installs without any problem. If you'd given up on a front fender, this is your solution.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eA design that doesn't get in the way of your style\u003c\/p\u003eDesigned to be as simple as possible and blend into the bike, so it looks natural even on chopper and bobber styles. As the installation images for each model show, it suits any style perfectly.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi10\"\u003eDoubles as a stabilizer to increase front rigidity\u003c\/p\u003eThis one part restores the front rigidity lost by going fenderless, for a \"full custom you can actually ride.\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_3.jpg\" width=\"600\"\u003e \u003cbr\u003e\u003cbr\u003e\u003cimg class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_img_4.jpg\" width=\"600\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eFitment\u003c\/p\u003eSR400\/500\u003cbr\u003e*The '77- TX650 and XS650SP have φ35 forks, the same as the early SR, so it can be installed.\u003cbr\u003e*The '73-'76 TX650 and earlier XS1, XS650 (E), etc. have different forks, and installation has not been confirmed.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eSize\u003c\/p\u003eFender\u003cbr\u003eLength: approx. 410mm  Width: approx. 104mm  Tube diameter: φ15.9mm\u003cbr\u003eStabilizer\u003cbr\u003eOverall height: approx. 160mm  Overall width between forks: approx. 130mm  Front-rear bolt pitch: approx. 60mm  Bolt hole diameter: approx. 9mm  Inner width: 121mm\u003cbr\u003e\u003cbr\u003e\u0026lt;Compatible tire outer diameter\u0026gt;\u003cbr\u003eStabilizer only: 710mm  With fender: 690mm\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eMaterial\u003c\/p\u003eFender: FRP  Bracket: steel\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi2\"\u003eContents\u003c\/p\u003eFender x1  Bracket x1 set  Pipe-work stabilizer x1\u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003e*If the tire is wider than 108mm, the stabilizer bolts must be fitted after the tire is installed.\u003cbr\u003e*The front wheel must be removed for installation.\u003cbr\u003e*Confirmed compatible with 4.00-size FIRESTONE tires.\u003cbr\u003e*It may not fit if the tire type or size is too large.\u003cbr\u003e\u003cbr\u003e*On the 3rd-gen SR and later, it mounts in a slightly higher position due to the height of the caliper mount. With stock-size tires there will be a slight gap as shown in the image\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_caution_1.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/G6-00029_caution_2.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"goods-faq\"\u003e\n\u003cp class=\"goods-faq-h\"\u003eFAQ\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-item\"\u003e\n\u003cp class=\"goods-faq-q\"\u003e\u003cspan\u003eQ \u003c\/span\u003eCan it be installed with a 21-inch wheel?\u003c\/p\u003e\n\u003cdiv class=\"goods-faq-a\"\u003e\n\u003cspan\u003eA\u003c\/span\u003e\u003cdiv\u003eYes, it can also be installed with a 21-inch wheel\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c!--\/goods-faq--\u003e\u003cbr\u003e\u003chr size=\"1\" align=\"left\" width=\"100%\"\u003e\u003cbr\u003e\u003cp class=\"midashi\"\u003eTo our dealers\u003c\/p\u003e\u003cbr\u003ePut it up in your guest room as a talking point with customers.\u003cbr\u003eWe offer original posters, ideal for promoting GOODS original parts and for shop interiors\u003cbr\u003e\u003cbr\u003eSee the posters here\u003cbr\u003e\u003ca href=\"https:\/\/www.goods-co.net\/products\/detail.php?product_id=122935\"\u003ehttps:\/\/www.goods-co.net\/products\/detail.php?product_id=122935\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cp class=\"midashi3\"\u003ePlease note\u003c\/p\u003eThese posters are limited to 3 per purchase.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eThey are promotional items strictly for in-store use.\u003cbr\u003e\u003cfont color=\"#FF0000\"\u003e*\u003c\/font\u003eIf you need more, for example for multiple stores, please contact us.\u003cbr\u003e\u003cbr\u003e*Click to enlarge\u003cbr\u003e\u003cimg width=\"600\" class=\"fancyzoom\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/GA-00076_img.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e","brand":"GOODS","offers":[{"title":"Default Title","offer_id":67446799237278,"sku":"G6-00029-BK","price":25850.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/files\/0000024718000.jpg?v=1790762491"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/3712\/7070\/collections\/453.jpg?v=1792738558","url":"https:\/\/www.goods-co.net\/en\/collections\/c-453.oembed","provider":"GOODS ONLINE SHOP","version":"1.0","type":"link"}