Assembly Diagram for the 16-Inch Steel Spokes (250TR/Estrella (Drum) Rear)
The assembly diagram for the 16-inch steel spoke wheel kit for the 250TR/Estrella (drum) rear. Photos show how to use and place the two spoke types (A and B) with different bends.
- Telling spokes A and B apart (small bend / large bend)
- Placement of A and B relative to the hub and rim
- Notes on assembly
These 16-inch steel spokes convert the rear wheel of the 250TR/Estrella (drum) to 16 inches. They're available as individual spokes or as a 16-inch kit (MT chrome) with rim and spokes.
Based on the photos in the instruction manual, this page shows how to use and place the two spoke types.
01 Spoke placement
This wheel uses two types of spokes with different bends. Refer to positions A and B in the photo and lace the correct type of spoke.
| Code | Spokes used |
|---|---|
| A | Spoke, small bend |
| B | Spoke, large bend |
Lacing spokes requires specialized wheel-building knowledge and work. After lacing, always check that everything is tight and the wheel is true. If you are unsure about the work, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.