Spoke Layout for the 16-Inch Kit Steel Spokes (SR400/500 Rear)
The spoke layout for the 16-inch kit steel spokes for the SR400/500 rear. Photos show where on the rim each of the two spoke types goes: spoke A with a small bend and spoke B with a long neck.
- The differences between the two spoke types (A, B)
- Spoke sequence on the rim
- Change in lacing pattern from August 2024 shipments
This reference covers the kit that converts the rear of the SR400/500 to 16 inches, as well as the individual steel spokes. Two types of spokes are used: one with a small bend and one with a longer neck.
Based on the photos in the original, this page shows each spoke type and its placement.
01 Spokes used and placement
The letters (A, B) on the rim in the photo show where each spoke goes. From the top, they run in the order B, A, A, B.
| Code | Spoke types |
|---|---|
| A | Spoke, small bend |
| B | Spoke, small bend (long neck) |
The lacing pattern has been changed slightly for rims shipped from August 2024.
Lacing and truing spokes requires specialized knowledge and tools. If you are unsure about the work, have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.