Spoke Layout for the 21-Inch Kit Steel Spokes (STEED400 Front)
The spoke layout for the 21-inch kit steel spokes for the STEED400 front. It shows the positions of the two spoke types (A and B) with different head lengths, and the key assembly point that the longer one goes on the inside.
- The differences between the two spoke types (A, B)
- Spoke sequence on the rim
- The longer spoke goes on the inside on both sides
This reference covers the kit that converts the front of the STEED400 to 21 inches. Two types of spokes with different head lengths (from the bend at the spoke head down) are used.
Based on the photos in the original, this page shows each spoke type and its placement.
01 Spokes used and placement
The letters (A, B) on the rim in the photo show where each spoke goes. They alternate two at a time in the order A, A, B, B.
| Code | Spoke types |
|---|---|
| A | Head length: short |
| B | Head length: long |
On both sides, the longer one goes on the inside.
Lacing and truing spokes requires specialized knowledge and tools. If you are unsure about the work, have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.