Installing the Round Bob Fender Kit (SR400/500)
Installation steps for the Round Bob Fender Kit for the SR400/500. Photos and parts diagrams walk you through removing the stock seat and fender, fitting the mounting brackets, securing the fender, and wiring the taillight.
- Attaching the fender mounting brackets to the seat rails
- Securing the fender with anti-vibration rubbers and collars (M6/M8 parts)
- Matching the harness-side and taillight-side wires
The Round Bob Fender Kit replaces the rear fender on the SR400/500 with a rounded bob-style fender. The included mounting brackets attach to the seat rail tubes, and the fender is secured to them via anti-vibration rubbers and collars.
Following Chapters 01-07, this page walks you through installation and wiring.
01 Installing the mounting brackets
-
Chapter.01 Remove the seat and fender.
-
Chapter.02 Secure the included fender mounting brackets to the seat rail tubes.
02 Installing the fender
-
Chapter.03 Fit the anti-vibration rubbers and collars into the holes in the fender.
-
Chapter.04 Bolt the fender to the brackets you installed in Chapter 02.
-
Chapter.05 Secure the fender using the bolt and collar.
-
Chapter.06 Retighten all bolts and nuts.
03 Connecting the wiring
Chapter.07 Connect the wiring, and the installation is complete.
| Harness side | Taillight side |
|---|---|
| Black | Yellow (ground) |
| Red | Red (brake) |
| Blue | Black (always on) |
To keep the wiring from touching the tire, stick the included wire clips to the underside of the fender and secure the wiring with them.
After installation, retighten all bolts and nuts and check that the taillight and brake light work. If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.