CRAZY CUB DUCK NumberBolt /CC110 Yellow (M&Ms)

Themed on the Cub,
a pop & crazy license plate bolt

A duck that adores the HONDA Cub
wears a Cub rear fender on its beak in this pop & crazy license plate bolt

---

M&Ms Sculpture.
A gem with attention to detail in every part of the sculpture

The distinctive beak represents the Cub's rear fender.
The bolted-on tip at the end feels just like a Cub
We focused on the lovable charm of the sloppily hanging tongue and unmotivated expression

Real painting.
Different textures for even more realism

The beak and helmet have a glossy clear finish
A wash that emphasizes the facial wrinkles and bloodshot eyes; different textures create even more realism

Gimmick.
Bolt embedded to make a license plate bolt

An M6 bolt is embedded in a Making&Monsters original sculpture to make a license plate bolt.
A large washer is included to help prevent the license plate from cracking.

---

Size

Width: approx. 27mm
Height: approx. 46mm
Depth: approx. 34mm (excluding bolt)
Bolt: M6-20mm

Material

Body: resin
Bolt: steel

Contents

Main unit x1
(Please note this is not a left/right pair)

Fitment

Universal



-----------------------------

[Please be sure to read]

All M&Ms sculptures are made entirely by hand, so please understand the following before purchasing

[About the warranty]

M&Ms products come with a 1-month product warranty.
If the sculpture breaks or comes off, please contact us.
*The product warranty does not cover natural aging or deterioration

[About aging and deterioration]

M&Ms license plate bolts and valve caps are finished with paint.
When mounted on a vehicle, some discoloration, fading, loss of gloss and coating deterioration will occur over time; please understand this before purchasing.
*Please understand in advance that flying stones, sand, rain, etc. may also speed up deterioration.

[About early deterioration]

M&Ms license plate bolts and valve caps undergo durability testing and aging/deterioration checks assuming "mounted on a bike" and "stored in an indoor garage."

The following conditions will speed up deterioration of the paint and coating.
Please avoid use in these conditions, or enjoy the product with aging and deterioration in mind.
*Please understand in advance that we do not offer a warranty for early deterioration under these conditions.

• Outdoor storage (storage exposed to rain and sunlight leads to early deterioration)
• Installation/use on cars or front license plates that are easily affected by rain, sand and flying stones
• Long rides in strong summer sun or facing the afternoon sun

[About the durability of the paint and body]

• Due to the nature of resin, the surface coating may lift slightly in places
• Paint is mixed each time, so colors may differ slightly from the product images

[Neon colors]

For their vivid colors, M&Ms neon colors use a special American paint.
It produces pop colors Japanese paints can't, but its durability and weather resistance are lower than Japanese paints.
Please understand this before purchasing.

[Installation notes]

• This product has a bolt embedded in the resin body. Please be careful, as "excessive" tightening may damage the bolt joint and the body
• Holding thin parts of the sculpture, or connecting parts on multi-piece designs, while tightening may break the resin. Always hold the thick "main body" of the resin when tightening the nut
• On some models the bolt is too long to install (Vespa, etc.). It takes a little time, but we can make one with your preferred bolt size, so just ask
• It may not be usable with license plate covers, etc.
• Installation on a car requires tightening with a nut.
• Video of the installation steps on a car:here (Instagram)

---

About
M&Ms (Making&Monsters)

M&Ms (Making and Monsters)

Presents artworks centered on sculptures by artist Mai.
Built around eye-catchingly realistic hand-painting, enjoy a lineup that isn't bound by genre

Instagram:@making_and_monsters
SHOP:https://mandms.theshop.jp/