Protection Decal Tank End for X350

Fits stock X350 tank
Original protection decal

A protection decal that prevents scuffs on the rear of the stock X350 tank.
A racy carbon graphic and three-dimensional domed decal shape also add a premium look to your bike

---

---

Size

Length: approx. 140 mm
Width: approx. 130mm

Material

Decal

Contents

Decal x1

Fitment

X350

Application procedure

・Before applying, thoroughly clean and degrease the application area. Dust and debris will trap air bubbles, so take great care
・Warm the decal slightly with a heat gun or hair dryer to soften it. (Overheating can deform the decal or melt the surface, so be careful)
・Spray water mixed with neutral detergent onto the bike and adhesive side, then apply while pushing air bubbles from the inside out with a spatula or squeegee
・For positioning relative to the stock stickers, refer to the reference images on the product page (the seat cowl decals have front/rear and left/right versions, so apply them carefully)
・Where the decal lifts, apply a little more heat with a hair dryer or similar to soften it so it conforms to the bodywork, then press it down
・After applying, wipe off all moisture and leave it undisturbed for about 24 hours while checking that the edges are not lifting

About the product

Due to factors such as the shape of the application area and the texture, material and shape of the stickers, air bubbles may not be completely removed. This product is mainly intended to be applied over the stock stickers to protect them

*When washing the bike, avoid using a pressure washer and wash gently
*Do not let gasoline or other solvents come into contact with the sticker (the surface may melt or discolor)
*When removing the protection decal, ink from the stock sticker may stick to it and peel off