Wiring Diagram for the Mechanical Speedometer φ60 with Indicator Lamps: Indicator and Wire Colors
The wiring chart for the Mechanical Speedometer φ60 with Indicator Lamps (58-43690). It lists the wire colors and +/- for each indicator: reverse, oil, turn signal, neutral, and high beam.
- Wire colors for the five indicator lamps
- Telling + from - on each wire
- Points to check when connecting
The Mechanical Speedometer φ60 with Indicator Lamps is a universal speedometer with built-in reverse, oil, turn signal, neutral, and high beam indicators.
This page shows the indicator and wire colors listed in the instruction manual, along with their positive/negative assignments.
01 Indicators and wiring
Each wire coming out of the gauge is assigned by color to the + (positive) or - (negative) side of a lamp, as shown below. Solid-color wires are +, and "color/black" wires are -.
| Wire colors | Polarity | Lamp |
|---|---|---|
| Orange | ＋ | Reverse lamp |
| Black | － | Reverse lamp |
| Red | ＋ | Oil lamp |
| Red/Black | － | Oil lamp |
| Yellow | ＋ | Turn signal lamp |
| Yellow/Black | － | Turn signal lamp |
| Green | ＋ | Neutral lamp |
| Green/Black | － | Neutral lamp |
| Blue | ＋ | High beam |
| Blue/Black | － | High beam |
Wire colors on the bike side vary by model and model year. Before connecting, check the wiring diagram in your bike's service manual or similar, and test that each lamp lights correctly. If you are unsure about the installation, have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.