Replacing the PXiD-F2 Stock Controller
How to replace the stock controller (48V20A / 48V25A) on the PXiD-F2. We cover removing the battery before you start, taking off the cover, handling the wiring, and swapping the controller.
- Removing the battery before you start
- How to remove the cover, and what to watch for with the wiring
- Removing and replacing the controller
The controller is the electrical component that controls the PXiD-F2's motor. The stock controller comes in two versions: 48V20A and 48V25A.
This page walks you through removing the cover on the underside of the bike and replacing the controller.
01 Before you start
Remove the battery with the key turned on, then turn the key off before you start working.
-
Remove the seat frame and the side frame on the left side of the bike.
-
Lay the bike on its side. Keep the brake applied while you do so.
02 Removing the cover
-
Remove the 12 bolts and nuts circled in red.
-
Disconnect the coupler and remove the cover.
When removing the cover, be careful of the wiring at the charging plug socket.
03 Replacing the controller
With the cover off, free up the wiring around the controller.
- Cut and remove all the zip ties bundling the wiring.
- The motor wiring is fastened to the swingarm; detach it.
- Also remove the rubber damper attached to the frame.
- Disconnect all couplers connected to the controller.
-
Remove the 4 bolts at the front and rear of the controller, and replace the controller.
04 Reassembly
After replacement, reassemble in the reverse order of removal. Use threadlocker on the bolts as needed.
Explanations of tools and general wiring work are omitted. Minor adjustments or workarounds may be needed due to individual differences between bikes. If you are unsure about the swap, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.