Installing the PXiD-F2 Center Stand
How to install the Center Stand for the PXiD-F2. Photos walk you through removing the left and right footboards, fitting the included bolts, installing the center stand, and reinstalling the stock bolt.
- Removing the footboards, and the stock bolt you'll need later
- Where to fit the included bolts (both ends on the left, 3 points on the right)
- Installing the center stand and retightening
A center stand that holds the PXiD-F2 upright when parked. It mounts using the footboard mounting points.
This page covers removing the footboards, installing the center stand, and retightening.
01 Removing the footboards
-
Remove the left and right footboards. You'll reuse one of the left footboard's mounting bolts later.
-
Fit the included bolts to the footboards. On the left footboard, use both ends; on the right footboard, use all 3 points.
One of the mounting bolts removed from the left footboard is used when installing the center stand. Keep it somewhere safe so it doesn't get lost.
02 Installing the center stand
-
Put the footboards back in their original positions on the bike and install the center stand.
-
Install the stock mounting bolt in the center hole of the left footboard.
-
Retighten everything and you're done.
Use threadlocker as needed during installation. Explanations of tools and general wiring work are omitted. Minor adjustments or workarounds may be needed due to individual differences between bikes. If you are unsure about the work, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.