Installing the PXiD-F2 Tandem Seat Kit
How to install the Tandem Seat Kit for the PXiD-F2. Photos walk you through installing the seat mount, moving the stock seat over, fitting the seat with grip, and adjusting its tilt.
- Installing the seat mount
- Removing the stock seat and moving it to the seat mount
- Fitting the seat with grip and adjusting its tilt with the adjuster
This kit adds a seat with a grip to the PXiD-F2. The stock seat is moved onto the seat mount and reused.
This page covers installing the seat mount, moving the seat over, and the final tilt adjustment.
01 Installing the seat mount
-
Install the seat mount with the included bolts.
02 Moving the stock seat
-
Release the lock under the seat and remove the seat.
-
Mount the removed seat on the seat mount and secure it with bolts.
03 Installing the seat with grip
-
Fit the seat with grip and lock it.
-
Turn the adjuster on the underside of the seat with a hex wrench to set the fore-aft tilt, and you're done.
Use threadlocker as needed during installation. Explanations of tools and general wiring work are omitted. Minor adjustments or workarounds may be needed due to individual differences between bikes. If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
What we used
- Hex wrench (for the adjuster on the underside of the seat)
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.