Installing the Smooth Semi-Double Seat (250TR) Together with the Round Bob Fender
Steps for installing the Smooth Semi-Double Seat for the 250TR together with the Round Bob Fender. We cover checking the position of the seat's rear bracket, drilling the fender, and fastening everything together with the separately sold fender support.
- What you need to install it with the Round Bob Fender
- Checking the seat's rear bracket position and drilling a 6.5mm hole
- How to fasten everything together with the fender support
The Smooth Semi-Double Seat is a semi-double seat for the 250TR. To install it together with the Round Bob Fender, you'll need the separately sold fender support and will have to drill a hole in the fender.
This page walks you through checking the seat's rear bracket position, drilling the hole, and securing it with the fender support.
01 What you need to install both together
To install the 250TR Smooth Semi-Double Seat together with the Round Bob Fender, you need the separately sold fender support. You'll also need to drill a hole in the fender.
02 Installation steps
-
Chapter.01 With the fender installed, fit the seat and check where the hole in the seat's rear bracket falls. Make sure the seat's front bracket is properly engaged with the frame.
-
Chapter.02 Drill a 6.5mm hole at the position you checked in step 1.
-
Chapter.04 Pass the fender support (sold separately) under the fender and secure it to the frame.
The bolt fastens the seat, fender, and fender support together.
03 Before use
Always check that all fasteners are tight before use. If you notice anything unusual during use, stop using it immediately and inspect it. If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.