Assembly Diagram for Grasstracker Slip-On Mufflers: Included Bracket Orientation by Model
The assembly diagram for the slip-on mufflers for the Grasstracker. It shows how the silencer, joint pipe, and stock exhaust pipe fit together, and how the included bracket's orientation differs by muffler type.
- How the silencer, joint pipe, and stock exhaust pipe fit together
- Bracket orientation for three types, including the Trumpet Straight
- Bracket orientation for three types, including the Short Turnout
The assembly diagram for the slip-on mufflers for the Grasstracker (Trumpet Slip-On Muffler and others). The included bracket's orientation differs by muffler type, so two diagrams are shown.
This page sorts out the part names shown in the diagrams and which muffler types each applies to.
01 Assembly diagram
From the left of the diagram, the silencer,joint pipe, and stock exhaust pipe connect in that order, and the silencer is secured with via the included bracket.
| Diagram | Applicable mufflers |
|---|---|
| Upper | Trumpet Muffler Straight / Flare End Megaphone Muffler / Reverse Cone Shorty Muffler |
| Lower | Short Turnout Muffler / Slash Cut End Muffler / Tapered Muffler |
The included bracket faces a different direction in the upper and lower diagrams. Check the bracket orientation in the diagram that matches your muffler.
- Silencer
- via the included bracket
- joint pipe
- Stock exhaust pipe
02 Notes
If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.