Assembly Diagram for 250TR Slip-On Mufflers (Carbureted): How the Included Bracket and Passenger Footpeg Line Up
The assembly diagram for the slip-on mufflers for the 250TR (carbureted). It shows how the silencer, muffler joint, and stock exhaust pipe connect, and where the included bracket attaches to the passenger footpeg.
- How the silencer, muffler joint, and stock exhaust pipe fit together
- Mounting position of the included bracket and passenger footpeg
- The bracket and silencer from another angle (inset)
This assembly diagram is shared by all slip-on mufflers for the 250TR (carbureted), including the Trumpet Slip-On Muffler and Reverse Cone Slip-On Muffler.
The original consists only of a diagram, so this page uses the part names shown on it to explain how the parts connect and where the included bracket goes.
01 Assembly diagram
The silencer is on the left of the diagram and the stock exhaust pipe on the right. They are joined by Muffler joint, with each joint secured by a band.
The silencer is secured via the included bracket to the passenger footpeg mounting point. The inset at the upper right shows the passenger footpeg, included bracket, and silencer from another angle.
- Silencer
- Muffler joint
- Stock exhaust pipe
- the passenger footpeg
- via the included bracket
02 Notes
If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.