Installing the TAPERED CONE Slip-On Muffler (250TR FI Compatible)
Installation steps for the TAPERED CONE slip-on muffler (taper cone muffler) for FI 250TR models. Photos walk you through removing the stock muffler, fitting the bracket with the included bolts, bolting it in place, and retightening everything.
- Removing the stock muffler
- Fitting the bracket with the included bolts, and its orientation
- Bolting it in place and retightening everything
The TAPERED CONE slip-on muffler is a slip-on muffler for FI 250TR models. It comes in polished and black finishes.
Following the chapter order of the original manual, this page covers six steps, from removing the stock muffler to completing the installation.
01 Installation steps
-
Remove the stock muffler.
-
Attach the bracket to the muffler using the included bolts.
-
Refer to the image for the bracket orientation.
-
Slide the muffler onto the header pipe.
-
Secure the bracket with the bolt.
-
Retighten everything, and the installation is complete.
If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.