Assembly Diagram for the TAPERED CONE Slip-On Muffler (Continental GT)
The assembly diagram for the TAPERED CONE slip-on muffler for the Royal Enfield Continental GT. Illustrations show where the muffler-side bracket and frame-side bracket are secured.
- Overview of the TAPERED CONE slip-on muffler
- How the muffler-side and frame-side brackets line up
- How the mounting point goes together with the bolt, washers, and nut
The TAPERED CONE slip-on muffler is a GOODS ESPECIALLY original muffler with a tapered cone shape that narrows toward the tip. This one is for the Royal Enfield Continental GT (G4-00136).
Based on the assembly diagram in the instruction manual, this page shows how the muffler and frame-side bracket are fastened together.
01 Assembly diagram
The muffler's bracket lines up with the bike's frame-side bracket and is secured with a bolt, washers, and a nut.
Explanations of tools and general work are omitted. Minor adjustments or workarounds may be needed due to individual differences between bikes. After installation, check that all fasteners are tight. If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.