Drawing of the Gauge Bracket for ARROW Cowling (for φ60, φ80)
A dimensional drawing of the gauge bracket for ARROW Cowling (for φ60 and φ80). It shows the diameters and positions of the gauge mounting holes and fixing holes, so you can check whether your gauges will fit.
- Overall dimensions and hole positions of the gauge bracket
- Diameters of the gauge mounting holes and fixing holes
- How it looks installed inside the cowl
A gauge bracket for mounting two gauges side by side inside the ARROW Cowling Kit's cowl. It accepts φ60 and φ80 gauges.
Based on the drawing in the original, this page shows the bracket dimensions. To check gauge fitment, compare the dimensions in the drawing with your gauges.
01 Installed
02 Drawing
Please use the drawing below to check and decide which gauges fit this gauge bracket.
The dimensions shown on the drawing are as follows.
- Distance between the mounting holes at the left and right ends: 218
- Large holes for the gauges: φ35
- Small hole diameters: φ15.5, φ14, φ5.5, φ6 (multiple locations)
- Vertical hole positions: 31.5, 20, 11.5 (63 total)
- Horizontal hole positions: 7.5, 45
For any questions, please reach us through our contact form. If you are unsure about the installation, have it done by someone experienced or by a custom shop.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.