MANUAL / TW200/225

Installing the FT Seat KIT (TW200/225): Seat Bracket, Mudguard and Tail Bracket

Installation steps for the FT Seat KIT for the TW200/225. Photos walk you through installing the seat bracket, mudguard, tail bracket and taillight, and the seat itself, in that order, along with the bolt and nut sizes used.

FTシートKIT（TW200/225）の取り付け手順 ― シートステー・マッドガード・テールステー

What you'll learn in this article

Installation order for the seat bracket, mudguard, and tail bracket
Sizes and quantities of the bolts and nuts used at each point
Where to fit the rubbers and collars that hold the side covers

The FT Seat KIT finishes off the rear end of the TW200/225 with a seat, mudguard, and tail bracket. You can choose a black or brown seat, a tuck-and-roll or plain cover, and a Lucas-style or LED oval taillight, and it also comes in color variations such as gray, matte khaki, white, and strobe yellow.

The installation steps are the same regardless of spec. This article covers the seat bracket, mudguard, tail bracket and taillight, and the seat itself, in that order.

01 Install the seat bracket

Mount the seat bracket included in the kit to the frame.
Uses:M6-10 ×2
Uses:M6-14 x2, M6 nut x2
Uses:M8-20, M8 nut

02 Install the mudguard

Install the included mudguard. Uses:M6-12 x2, M6 nut x2
Secure the lower part of the mudguard with a zip tie.
Stick the included rubber onto the seat bracket.
Attach the rubbers and collars to the mudguard. Uses:M6-20 x2, M6 nut x2, rubber/collar x2

POINT

The rubbers and collars on the mudguard are for holding the side covers in place.

03 Install the tail bracket and taillight

Install the included tail bracket. Uses:M6-14 x2, M6 nut x2

We recommend two taillights for this kit: the Lucas L525 replica taillight and the LED oval taillight.

ルーカスL525レプリカテール — Lucas L525 Replica Taillight

04 Install the seat

Slide the seat in from the front and bolt down the rear.

Notes

Explanations of tools and general wiring work are omitted. Minor adjustments or workarounds may be needed due to individual differences between bikes. If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions about installation, please reach us through our contact form.

Products covered in this article

FT Seat KIT TW200/225 BLACK/Tuck Lucas Taillight FT Seat KIT TW200/225 BLACK/Tuck LED Oval Taillight FT Seat KIT TW200/225 BLACK/Plain Lucas Taillight FT Seat KIT TW200/225 BLACK/Plain LED Oval Taillight FT Seat KIT TW200/225 BROWN/Tuck Lucas Taillight FT Seat KIT TW200/225 BROWN/Tuck LED Oval Taillight FT Seat KIT TW200/225 BROWN/Plain Lucas Taillight FT Seat KIT TW200/225 BROWN/Plain LED Oval Taillight

Installing the FT Side Covers (TW200/225)

Installing the FT Headlight KIT (TW200/225)

Installing the FT Down Muffler (TW200/225)

*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.