Installing the Short Bobber Fender (Estrella): From the Fender Struts to the Turn Signal Brackets
Installation steps for the Short Bobber Fender (rear fender struts) for the Estrella. Photos walk you through securing the struts with the included bolts and collars, four-point mounting of the fender, and fitting the turn signal brackets.
- Replacing the upper shock bolt and the order for securing the struts
- Four-point fender mounting with bolt A and collar A
- Fastening the turn signal brackets together using collar B
The Short Bobber Fender is a kit that fits a short bobber-style fender to the rear of the Estrella. The fender struts are secured to the top of the shocks and to the frame, and the fender is then fastened to them.
This page covers the included parts, then the installation steps in order: fender struts, fender, and turn signal brackets.
01 Included parts
02 Installing the fender struts
-
Replace the upper shock bolt with the bolt from the included "bolt and collar set."
-
Pass it through the bolt, washer, frame, collar, and strut in that order, and snug the nut loosely.
-
Secure the front of the strut to the frame using bolt B and collar A.
03 Installing the fender
-
Fasten the fender using bolt A and collar A (4 points).
04 Installing the turn signal brackets
-
If you're fitting the turn signal brackets, secure collar B and the turn signal bracket to the fender together.
After installation, check that every fastener is tight, including the nuts you snugged loosely. If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.