Installing the XL-FT Fuel Tank KIT (Sportster)
Installation steps for the XL-FT Fuel Tank KIT for the Sportster. Photos walk you through moving the pump over from the stock tank, assembling the tank brackets, mounting the tank on the bike, and connecting the fuel line and coupler.
- How to move the fuel pump over from the stock tank
- Assembling the anti-vibration rubbers, collars, and tank brackets
- Mounting the tank on the bike and connecting the fuel line and coupler
The XL-FT Fuel Tank KIT is a fuel tank kit for the Harley-Davidson Sportster.
This article shows how to prepare the tank by fitting the pump and brackets, then mount it on the bike and connect the fuel line and coupler.
01 Preparation
-
Remove the pump from the stock tank and install it in the FT fuel tank.
-
Fit the anti-vibration rubbers to the tank brackets and set the collars as shown in the photo.
-
Attach the tank brackets to the FT tank.
02 Installation
-
Mount the FT tank on the bike.
-
Bolt the tank brackets in place and secure them.
-
Connect the fuel line to the fuel check valve.
-
Connect the fuel pump coupler, and the installation is complete.
Use threadlocker as needed during installation. Explanations of tools and general wiring work are omitted. Minor adjustments or workarounds may be needed due to individual differences between bikes. If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions about installation, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.