Installing the Light & License Plate Relocation Kit (RH1250S Sportster S)
Installation steps for the Light & License Plate Relocation Kit for the RH1250S Sportster S. We explain everything from removing stock parts such as the seat and taillight to fitting the side license plate unit and included taillight, and wiring.
- Removing the seat, taillight and side cover, and how to disconnect the connector
- Fitting the side license plate unit and included taillight
- Connecting the wiring according to the wiring reference diagram
The Light & License Plate Relocation Kit relocates the RH1250S Sportster S's license plate and taillight to the side of the bike. The side license plate unit and taillight come as a set.
With photos, this page covers everything from removing the stock parts to fitting the side license plate unit and taillight, and wiring.
01 Removing the stock parts
-
Remove the seat, taillight and so on.
-
Remove the side cover and disconnect the taillight connector.
02 Fitting the side license plate
Referring to the photo, fit the side license plate unit.
03 Fitting the taillight
Fit the included taillight.
04 Wiring
Connect each wire, and the installation is complete.
Use thread-locking compound as needed during installation. Explanations of the tools used and general wiring work are omitted. Due to variation between individual bikes, some minor adjustment or improvisation may be needed. If you're unsure about the installation, always have it done by someone knowledgeable or a custom shop. For questions or anything unclear, please contact us via the contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.