Installation Diagram for the TAPERED CONE Slip-On Muffler (TRIUMPH Bonneville/SE)
The installation diagram for the TAPERED CONE slip-on muffler for the TRIUMPH Bonneville/SE. It shows how to secure the silencer with the stock muffler bracket and included bolts, and how to handle the frame-side bolts and the stock stopper rubber.
- Securing the silencer with the stock muffler bracket and included bolts
- Use the stock bolts on the frame side
- Position of the stock stopper rubber
The TAPERED CONE slip-on muffler is a dual (left and right) slip-on muffler for the TRIUMPH Bonneville/SE.
The original consists of a diagram and a short description. This page explains the installation method shown in the diagram.
01 Installation diagram
- Attach the stock muffler bracket to the silencer with the included bolts and install it.
- On the frame side, use the stock bolts.
- On the bracket, use the stock stopper rubber.
02 Notes
If you are unsure about the installation, be sure to have it done by someone experienced or by a custom shop. For any questions, please reach us through our contact form.
Products covered in this article
Related articles
*Installation is at your own risk. If you're unsure about doing the work yourself, we recommend consulting your local motorcycle shop.
*The content and photos reflect the time of writing. Please check each product page for current specifications, fitment and stock.